enable snmp trap l3vpn

enable snmp trap l3vpn {vr_name}

Description

This command enables Layer 3 VPN MIB notification traps for the child VPN VRFs of the specified VR.


`vr_name`	Specifies the name of the parent VR where this RFC 4382 scalar is applied. If `vr_name` is not provided, then this command is applied to the VR in the current context.

Disabled.

This command enables generation of the following Layer 3 VPN SNMP traps:

mplsL3VpnVrfUp—Sent when the first IP VLAN becomes active and the administrative state is enabled.
mplsL3VpnVrfDown—Sent when the last active IP VLAN becomes inactive, or the administrative state is disabled.

The following example enables SNMP traps for Layer 3 VPNs on the default VR:

enable snmp traps l3vpn vr vr-default

This command was first available in ExtremeXOS 15.3.

This command is available on all Universal switches supported in this document.